Chimney Rebuild in the Twin Cities, MN | Free Estimate
Minneapolis · St. Paul · Surrounding Cities

Chimney Rebuild in the Twin Cities

When freeze-thaw damage has gone past what repointing can fix, we rebuild the chimney above the roofline with matched brick and proper flashing — built right the first time.

Free EstimatesCertified & Insured3-Year WarrantyNext-Day Service
FreeOn-Site Estimate
Chimney rebuild in the Twin Cities
The short answer: MockingBird Chimney rebuilds chimneys across the Minneapolis–St. Paul metro, typically reconstructing the portion above the roofline where decades of freeze-thaw damage have gone past what repointing or spot repairs can fix. A rebuild uses matched or salvaged brick, fresh mortar, a new crown, and correctly installed flashing, so the finished chimney doesn't just look right — it's actually built to shed water the way it should have from the start. Because rebuild scope varies enormously, from a partial rebuild of the top few feet to a full reconstruction, estimates are free and given after we assess the actual structural condition on-site.
What's Included

What a rebuild actually involves.

Structural assessment

Determining exactly how much of the chimney needs to come down and be rebuilt.

Careful demolition

Removing damaged masonry without disturbing the sound structure below.

Matched brick & mortar

Sourced or blended to match your home's existing masonry as closely as possible.

Proper flashing installation

Step and counter flashing installed correctly during the rebuild, not left to chance.

New crown

Poured with correct slope and overhang as part of the rebuild, not an afterthought.

Final waterproofing

A breathable sealant applied to protect the fresh masonry from day one.

Signs You Need One

When repair isn't enough anymore.

01

Visible leaning or bulging

The chimney is structurally compromised, not just cosmetically damaged at the surface.

02

Repointing keeps failing in the same spot

A sign the underlying structure has shifted and surface repairs can't hold.

03

Missing or crumbling brick across a wide area

Spalling that's progressed beyond what individual brick replacement can address.

04

A Level 2 inspection flagged structural concerns

The most serious finding an inspection can surface, usually pointing toward a rebuild.

05

The chimney was neglected for many years

Deferred maintenance compounds over time until repair alone is no longer enough.

Pricing

Why rebuild pricing varies so widely.

A partial rebuild and a full reconstruction are both "chimney rebuild," at very different price points.

Free

On-Site Estimate

No service call fee, no obligation. Written quote before any work begins.

Extent of the rebuild

A partial rebuild of the top few feet costs far less than a full reconstruction.

Height & access

Taller chimneys and steep rooflines require scaffolding, which adds to the job.

Brick & mortar matching

Salvaged or custom-matched materials cost more than a generic mix.

Structural complexity

Multi-flue chimneys or unusual shapes add engineering considerations.

How It Works

Four steps, no surprises.

Step 01

Call or text

Tell us what you're seeing — leaning, crumbling, or a failed repair.

Step 02

Free on-site estimate

We assess the structure and give you a written quote.

Step 03

The rebuild

Careful demolition, then matched brick and mortar rebuilt to spec.

Step 04

Walkthrough

We confirm it's sound and back it for three years in writing.

Common Questions

Straight answers.

It depends heavily on scope — a partial rebuild of the top few feet is a very different job from a full reconstruction. We give a free on-site estimate with a written quote before any work begins.

Tuckpointing addresses mortar joints. A rebuild is needed when the structure itself has failed — visible leaning, widespread crumbling brick, or repointing that keeps failing in the same spot. An inspection can usually tell you which one you actually need.

We source or blend brick and mortar to match as closely as materials allow. Since most rebuilds only reconstruct the portion above the roofline, matching the visible section closely is usually achievable.

A partial rebuild often takes one to a few days. A full reconstruction can take longer depending on height, access, and weather. We'll give you a realistic timeline as part of the estimate.

Yes, and that's the most common scenario. Freeze-thaw damage typically concentrates above the roofline, so a partial rebuild of that section is usually sufficient rather than reconstructing the entire structure.

Yes. A proper rebuild includes a new crown with correct slope and overhang, along with correctly installed flashing, since rebuilding the masonry without addressing those components would leave the same failure points in place.

Service Area

Chimney rebuilds across the Twin Cities metro.

Roughly 40 miles out from Minneapolis and St. Paul.

MinneapolisSt. PaulBloomingtonEdinaWoodburyEaganPlymouthMaple GroveMinnetonkaBurnsville+ 35 more cities

Wondering if it's time for a rebuild?

Free on-site estimate, written quote, no obligation. Next-day scheduling across the Twin Cities metro.

Get a Free Quote

No commitment · No service call fee · Same-day available

Contact Form

We never share your information